McCrometer - US
Join Our Email List 1-800-220-2279 

SPI Mag 3000

SPI Mag 3000
Series: SPI-MAG-3000
Unit Price Contact McCrometer

Specifications

Accuracy: AC or DC power: ±2% of measured value ±0.006 ft/s (±0.0018 m/s)
Battery power: ±2% of measured value ±0.006 ft/s (±0.0018 m/s)
Directional Response: Reads 0 when flow is in reverse
Electrical Connections: Compression gland seals for 0.125” to 0.375” dia. round cable
Insertion Tube: 1” stainless steel tube
- 12” - will profile 4” pipe ID
- 24” - will profile 16” pipe ID
- 36” - will profile 28” pipe ID

2” PVC tube
- 18” - will profile a 10” pipe ID
- 24” - will profile a 16” pipe ID
- 30” - will profile a 22” pipe ID

Opt. stainless steel tube. Specify length - 240” max
IP Rating: IP68 submersible sensor
Line size: 2 to 240 inches (50 mm to 6,096 mm)
Material:
  • Sensor: Polyurethane exposed to flow

  • 2” sensor mounting: PVC and Stainless Steel exposed to flow. (Stainless Steel Insertion Tube Optional)

  • Compression seal Buna “N” O-Ring seal exposed to flow
Measurement Method: Electromagnetic flow measurement

- Volumetric flow in filled flow conduits 2” (50mm) to 240” (6,096 mm) diameter utilizing insertable velocity sensor. 1” meter = 2” to 30” pipe I.D.; 2” meter = 6” to 240” pipe I.D.
- Flow indication in English Standard or Metric units
- To determine insertion tube length for typical near wall installations, divide the pipe I.D. by 8 and add 18”.
- For full profiles, add 18” to the pipe I.D.
- Tube assemblies include rods and mounting hardware
Operating Conditions: Pressure/temperature limits

- PVC Insertion Tube: Up to 105°F (41°C) at 150 PSI
- Stainless Steel Insertion Tube: Up to 160°F (71°C) at 250 PSI (McCrometer recommends the use of Stainless Steel)
- Note regarding storage: During freezing conditions and when meter is not in use, sensor must be removed from pipe and stored in dry conditions.

NOTE: Damage to the sensor caused by allowing the sensor freeze in the pipe is not covered by the warranty.
Options:
  • Sensor Insertion Tool

  • Additional Sensor Cable up to 200’ (for longer lengths consult factory)

  • Valves
Sensor Cable: Standard: 25’ McCrometer supplied submersible cable with each remote mount unit
Optional: Up to 200 feet, or 25 feet max for battery powered
Velocity Measurement Range: +0.3 to +32 ft/s (+0.09 to +10 m/s)
Warranty: 24 months